Effect of Atmospheric Conditions on Plaster The prevailing weather at the time of plastering or during the setting, drying and hardening period may affect the finished work as follows: 1. Frost The destructive effect of frost on plaster work is significant. Unless special precautions are adopted, plastering work shall be suspended entirely during frosty weather. … Read more
Thickness of Plastering Finishing coats (and single-coat work, where employed) should be of such minimum thickness as just to provide a sufficient body of material to harden satisfactorily under the site conditions in any particular case. The total thickness of two-coat work exclusive of keys or dubbing out shall be generally about, but shall not … Read more
Number of Plaster Coats for Different Backgrounds The ideal number of coats, where practicable, is two, namely, the undercoat followed by a finishing coat. It is recognized, however, that much successful work has been carried out in the past with only a finishing coat plaster on reasonably plane backgrounds of brick, concrete and similar materials. … Read more
Importance or Objectives of Plastering Appearance To improve the appearance of the surface by providing an even, smooth, regular, clean and finished surface. Protection In case of external plastering, the objective is to preserve and protect the surface from atmospheric influences by acting as a protective coating. In case of internal plastering, the basic object … Read more
Blistering The development of one or more local swellings on the finished plaster surface. Cracking The development of one or more fissures not assignable to structural cause. Crazing The development of a series of hair cracks on the finished plaster surface. Known as ‘map crazing’, when it forms a haphazard pattern over the wall surface … Read more
Difference Between Mortar & Plaster Mortars are used in masonry for joining stones, bricks, blocks etc. and plasters are used for rendering on the outside and inside of walls. The differences between mortar and plaster lie in the capacity of plasters to take better finish, which depend to a very large extent on the type … Read more
Sand used for plaster work can be natural sand, crushed stone sand or crushed gravel sand. The grading limit of sand for plaster work; for internal and external wall and ceiling should be as given in the table below. Grading Limit of Sand for Plaster Work IS Sieve Size Percentage Passing 10 mm 100 4.75 … Read more