Objective For determination of relative quantity of mixing water that will bleed from a sample of freshly mixed concrete. Reference Standard IS : 9103-1999 – Method of sampling and analysis of concrete. Equipment & Apparatus Cylindrical measure Tamping Bar Pipette Graduated Jar Procedure The container is filled with concrete up to a height of 250±3 … Read more
Objective For determination of consistency of concrete where the nominal maximum size of aggregate does not exceed 38 mm using flow table apparatus. Reference Standard IS : 1199 – 1959 – Method of sampling and analysis of concrete. Equipment & Apparatus Flow table Procedure Before commencing test, the table top and inside of the mould … Read more
Objective For determination of consistency of concrete where the nominal maximum size of aggregate does not exceed 38 mm using compacting factor test apparatus. Reference Standards IS: 1199 – 1959 – Method of sampling and analysis of concrete. Equipment & Apparatus Compacting factor apparatus. Procedure The sample of concrete to be tested is placed … Read more
Object For determination of consistency of concrete where the nominal maximum size of aggregate does not exceed 38 mm using slump test apparatus. Reference Standards IS : 1199 – 1959 – Method of sampling and analysis of concrete. Equipment & Apparatus Slump cone Tamping rod Procedure The internal surface of the mould is thoroughly cleaned … Read more
Objective For determination of bulk density of bricks Equipment & Apparatus Oven (3000C) Scale Balance (0-10kg) Procedure The brick is dried in a ventilated oven at a temperature of 1050 to 1150C till it attains substantially constant mass. The brick is then cooled to room temperature and its mass is recorded.(M) Then the dimensions of … Read more
Objective For determination of compressive strength of bricks Reference Standard IS: 3495 – P (1)-1992-Methods of tests of burnt clay building bricks (Determination of compressive strength) Equipment & Apparatus Compression Testing Machine Scale for measuring dimension of brick Procedure Unevenness observed in the bed faces of bricks is removed to provide two smooth and parallel … Read more
Objective For determination of efflorescence of bricks Reference Standards IS: 3495 – Part(3)-1992 Equipment & Apparatus Oven (3000c) Procedure A shallow flat bottom dish containing sufficient distilled water to completely saturate the specimens is used for the test. The ends of the bricks are placed in the dish, the depth of immersion in water being … Read more
Objective For determination of water absorption of bricks Reference Standards IS : 3495 (Part-2)-1992,RA 2011 Equipment & Apparatus Balance (0-10 kg) Procedure The specimen is dried in a ventilated oven at a temperature of 105 to 1150C; till it attains substantially constant mass. The specimen is cooled to room temperature and its weight is recorded … Read more
Objective For determination of specific gravity & water absorption of aggregates. Reference Standards IS : 2386 (Part 3) – 1963 – Method of test for aggregates for concrete (Part I) Particle size and shape. Equipment & Apparatus Wire basket Oven (3000c) Container for filling water and suspending the basket An air tight container Balance[0-10 kg] … Read more
Objective For determination of angularity number of coarse aggregates. Reference Standards IS: 2386 (Part I) – 1963 – Method of test for aggregates for concrete (Part I) Particle size and shape. Equipment & Apparatus Balance (0-10kg) Sieves (20,16,12.5,10,6.3,4.75mm) Metal cylinder Tamping rod Scoop Test Sample Preparation The test sample consist of aggregate retained between the … Read more