Setting Time Test of Concrete The setting of concrete is a gradual process, and therefore its initial and final setting times must be defined by specified measurable criteria. The penetration resistance method determines these times from the resistance offered by the mortar fraction sieved from fresh concrete. Reference ASTM C403/C403M – Time of Setting of … Read more
Concrete durability is often governed not only by its compressive strength but also by the quality of its surface zone. The outer layer of concrete is the first line of defence against rainwater, moisture and other environmental actions. A concrete surface that absorbs water rapidly may indicate poor finishing, inadequate curing, a porous surface layer … Read more
Pile Integrity Testing (PIT), also known as low-strain impact integrity testing, is a non-destructive method used to evaluate the continuity, consistency and approximate physical dimensions of deep foundation elements. The test is applicable to driven concrete piles, cast-in-place piles, drilled shafts, augered piles and other deep foundation members that can respond to a low-strain impact. … Read more
The compressive strength test is one of the most important quality-control tests for concrete. ASTM C39/C39M covers the determination of compressive strength of molded concrete cylinders and drilled cores having a density greater than 800 kg/m³. The test involves applying a continuously increasing axial compressive load until failure and calculating the strength from the maximum … Read more
Building a new home is one of the biggest financial decisions most people will ever make. While the design, location, and finishes are important, the success of the project often depends on one critical decision: choosing the right new home construction contractor. The wrong contractor can lead to delays, cost overruns, poor workmanship, and stressful … Read more
Fly Ash Bricks – Quality Requirements As per IS 16720 Fly ash bricks, technically referred to in IS 16720:2018 as Pulverized Fuel Ash-Cement Bricks, are masonry units manufactured primarily using pulverized fuel ash (fly ash), cement, aggregates and water. The use of fly ash in bricks provides an effective way of utilizing a thermal power … Read more
Concrete may look rigid and immovable, but a concrete structure is continuously subjected to dimensional changes throughout its service life. Changes in temperature, drying shrinkage, creep, moisture and other environmental effects can cause concrete to expand, contract or deform. If these movements are restrained, stresses can develop within the concrete. When the induced tensile stress … Read more
Steel is considered to be one of the vital construction materials. The process of construction involves the bending of steel to a particular form. Consequently, it is important to check the ductility of the steel, which is the ability to deform under applied pressure. Bend and Rebend Test This test procedure is used to check … Read more
Establishing a reliable relationship between rebound hammer numbers and the compressive strength of concrete is a crucial aspect of quality control in construction projects. This correlation serves as a valuable tool for rapid, non-destructive assessment of concrete strength in both existing and under-construction structures. The rebound hammer test offers a quick and cost-effective method to … Read more
Sustainability of Concrete Concrete is everywhere. From foundations and retaining walls to bridges, dams, high-rise buildings, industrial plants and roads, modern infrastructure would be almost impossible to imagine without it. But concrete has a sustainability problem. The issue is not really concrete itself. The biggest environmental impact comes from the cement used to make concrete—particularly … Read more
Subscribe to our mailing list and never miss the latest blog post.
