WHAT ARE THE FACTORS AFFECTING FIELD COMPACTION OF SOIL?

There are many factors which influence the degree of compaction in the field. Some are compactor dependent and some depend on the soil being compacted. The factors which affect the degree of compaction are given below. 1. Type of soil Type of soil has a great influence on its compaction characteristics. Normally, heavy clays, clays … Read more

HOW TO DETERMINE SPECIFIC GRAVITY OF SOIL?

Objective For determination of specific gravity of soil solids by pycnometer method. Equipment & Apparatus Pycnometer Sieve(4.75 mm) Vacuum pump Oven Weighing balance Glass rod Preparation sample After receiving the soil sample it is dried in oven at a temperature of 105 to 1150C for a period of 16 to 24 hours. Procedure Dry the … Read more

WHAT ARE THE VALUES OF MODULUS OF ELASTICITY & POISSON’S RATIO FOR DIFFERENT ROCKS?

Metamorphic rocks

Modulus of Elasticity of Rock Modulus of elasticity of rocks depend upon several factors, such as, Type of rock Porosity Grain size Water content Value of modulus of elasticity can be determined by static or dynamic methods. Higher value of modulus of elasticity indicates good quality rock having sound composition. Typical values of modulus of … Read more

HOW TO INSPECT PHYSICAL CHARACTERISTICS OF AGGREGATE USED IN CONCRETE?

While inspecting aggregate for quality control purpose, it is required to describe its physical properties, because physical properties of aggregate have an effect on the property of concrete. The physical properties of aggregate which should be described are given below. Name of parent rock & Group name Particle Shape Surface Texture Let us see how … Read more

HOW TO CLASSIFY ROCKS ON SITE? (GEOLOGICAL OR LITHOLOGICAL CLASSIFICATION)

Rocks can be classified on site, on the basis of its physical appearance. By making a through visual inspection we can ascertain the engineering properties of rocks. Field classification of rocks gives us logical insight about the suitability of rocks for engineering purpose. This type of classification is known as geological or lithological classification of … Read more

HOW TO BLEND AGGREGATE USING FINENESS MODULUS VALUE?

Sometime it may happen that, the aggregate available at site is not conforming to the desired grading. In such case two or more aggregates from different sources may be combined to get the required grading. Fineness modulus value can be used as a technical way to blend coarse aggregate with fine aggregate to produce desired … Read more