Suryakanta Objective For determination of the aggregate abrasion value of coarse aggregate. Reference Standards IS: 2386 (Part IV)-1963 Methods of test for aggregate for concrete Part IV Mechanical Properties. Equipment & Apparatus Los Angeles machines Sieves (1.70mm) Cylindrical metal measure Tamping Rod Balance (0-10kg) Oven (3000c) Preparation sample Test sample is dried in oven for a … Read more
Objective For determination of the aggregate crushing value of coarse aggregate, which passes 12.5 mm. IS sieve and retained on 10 mm. IS sieve. Reference Standard IS: 2386 (Part IV)-1963 Methods of test for aggregate for concrete Part IV Mechanical Properties. Equipment & Apparatus Steel Cylinder Sieves (12.5mm,10mm) Cylindrical metal measure Tamping Rod Balance (0-10kg) … Read more
Objective For determination of the aggregate impact value of coarse aggregate, which passes 12.5 mm. IS sieve and retained on 10 mm. IS sieve. Reference Standards IS: 2386(Part IV)-1963 Methods of test for aggregate for concrete Part IV Mechanical Properties. Equipment & Apparatus Aggregate Impact Test Machine Sieves (12.5mm,10mm) Cylindrical metal measure Tamping Rod Balance … Read more
Overview Specific gravity is defined as the ratio between the weight of a given volume of cement and weight of an equal volume of water. Apparatus Measuring Instruments NAME CAPACITY / RANGE / SIZE ACCURACY / LEAST COUNT Lechatelier flask Balance Water bath Other Apparatus Tray Environmental Conditions Temp Relative humidity Test Procedure Dry the Le-chatelier … Read more
Overview Compressive strength of cement is determined by compressive strength test on mortar cubes compacted by means of a standard vibration machine. Standard sand (IS:650) is used for the preparation of cement mortar. The specimen is in the form of cubes 70.6mm*70.6mm*70.6mm. Apparatus Measuring Instruments NAME CAPACITY / RANGE / SIZE ACCURACY / LEAST COUNT Cube … Read more
Overview In the soundness test a specimen of hardened cement paste is boiled for a fixed time so that any tendency to expand is speeded up and can be detected. Soundness means the ability to resist volume expansion. Apparatus Measuring Instruments NAME CAPACITY / RANGE / SIZE ACCURACY / LEAST COUNT Autoclave 1000C (min) 10C Length … Read more
Overview In the soundness test a specimen of hardened cement paste is boiled for a fixed time so that any tendency to expand is speeded up and can be detected. Soundness means the ability to resist volume expansion. Apparatus Measuring Instruments NAME CAPACITY / RANGE / SIZE ACCURACY / LEAST COUNT Le-chatelier apparatus Should be made … Read more
Overview Initial setting time is that time period between the time water is added to cement and time at which 1 mm square section needle fails to penetrate the cement paste, placed in the Vicat’s mould 5 mm to 7 mm from the bottom of the mould. Final setting time is that time period between … Read more
Last updated on 22 June 2026 Overview Standard consistency of a cement paste is defined as that consistency which will permit a vicat plunger having 10 mm dia and 50 mm length to penetrate to a depth of 33-35 mm from top of the mould. Apparatus Measuring Instruments NAME CAPACITY / RANGE / SIZE ACCURACY / … Read more
Last updated on 22 June 2026 Overview Fineness of cement is measured by sieving it on standard sieve. The proportion of cement of which the grain sizes are larger than the specified mesh size is thus determined. Apparatus Measuring Instruments NAME CAPACITY / RANGE / SIZE ACCURACY / LEAST COUNT Sieve 90 micron mesh — Balance … Read more