Difference Between Mortar & Plaster Mortars are used in masonry for joining stones, bricks, blocks etc. and plasters are used for rendering on the outside and inside of walls. The differences between mortar and plaster lie in the capacity of plasters to take better finish, which depend to a very large extent on the type … Read more
In order to check the quality of masonry mortar, we have to conduct different tests on mortar. The quality and accuracy of test result is dependent upon the type of sample tested. Therefore it is required to follow some guidelines at the time of sampling. Samples of masonry mortar are obtained in equal increments and … Read more
The sand is used in mortar for the following purposes Bulk It does not increase the strength of mortar. But it acts as adulterant. Hence the bulk volume of mortar is increased which results in reduction of cost Setting If building material is fat lime, the carbon dioxide is absorbed through the voids of sand … Read more
Following are the properties of a good mortar: Properties of Good Mortar It should be capable of developing good adhesion with the building units such as bricks, stones etc. It should be capable of developing the designed stresses. It should be capable of resisting penetration of rain water. It should be cheap. It should be … Read more
Following precautions are to be taken while making use of mortar Consumption of Mortar After preparation, the mortar should be consumed as early as possible. The lime mortar should be consumed within 36 hours after its preparation and it should be kept wet or damp. The cement mortar should be consumed within 30 minutes after … Read more