FUNCTIONS OF DIFFERENT COATS OF RENDERING [OUTSIDE PLASTERING]
‘Rendering’ denotes generally external plaster and related finishes (plain or textured), applied for the purpose of protection and decoration.
Plaster
HOW TO MINIMISE THE DEFECTS IN PLASTERING WORK?
Minimising Defects in Plastering Work Defects in plastering work can be minimised by following the below mentioned techniques. The brick and plastering work should be carried out by skilled masons in the best workmanship manner. Bond of brick work should be properly maintained. Efflorescence is removed by rubbing brushes on the damaged surface. A solution … Read more
DIFFERENCE BETWEEN PLASTERING & POINTING
PLASTERING Applying mortar coats on the surfaces of walls, columns, ceiling etc. to get smooth finish is termed as plastering. Mortar used for plastering may be lime mortar, cement mortar or lime-cement mortar. Lime mortar used shall have fat lime to sand ratio of 1 : 3 or 1 : 4. If hydraulic lime is … Read more
PLASTERING – THINGS EVERY ENGINEER SHOULD KNOW
PLASTERING The following topics are covered in this post. What is plastering? What are the requirements of good plaster? Different types of mortars for plastering Number of coats of plastering How to preparation of background before plastering? What are the recommended mortars mixes for different situation? What are the defects in plastering? What is plastering? … Read more
7 FORMS OF DEFECTS IN PLASTER
TYPES OF DEFECTS IN PLASTER This post describes 7 different categories of defects most frequently noticed in plaster (as mentioned below) Non-structural cracks Structural cracks Debonding Lack of hardness Grinning Expansion Popping The causes and repair methods for each are discussed below. 1. Non-structural cracks Crazing is a network of fine cracks, usually in a … Read more
4 DIFFERENT TYPES OF LIMES USED IN CONSTRUCTION
Types of Limes Different types of limes are used for building construction. It is not generally found in the free state. Lime is a product which is obtained by burning lime stone, a raw material, found in lime stone hills or lime stone boulders in the beds of old river, kankar found below ground level, … Read more
HOW TO IMPLEMENT QUALITY ASSURANCE FOR CEMENT PLASTERING?
Quality Assurance for Cement Plastering Plastering is a process of applying one or more coats of mortar to a concrete surface, brickwork, stone masonry or lathing. It must be durable such that it resists the penetration of moisture and should be able to weather uniformly. It should also be pleasing in appearance. These properties depend … Read more
HOW TO APPLY CEMENT PLASTER ON WALL SURFACE?
Cement plastering is commonly used as ideal coating for external and internal surface of wall. Cement plaster is usually applied in a single coat or double coat. Double coat plaster is applied where thickness of plaster is required to be more than 15 mm or when it is required to get a very fine finish. … Read more
EFFLORESCENCE ON PLASTER SURFACE – WHAT, WHY & HOW?
What is Efflorescence on Plaster Surface? Efflorescence is one type of defect found on plaster surface. Efflorescence is the whitish crystalline substance which appears on the surface of walls due to presence of soluble salts, such as suphates of sodium, calcium and magnesium. Why Efflorescence Happens on Plaster Surface? Presence of salts in the lime, … Read more
WHAT ARE THE RECOMMENDED PLASTER SPECIFICATIONS FOR DIFFERENT SITUATIONS?
Recommended Plaster Specifications A list of specifications for mixes suitable for various situations, which cover single-coat, two-coat and three-coat work is given in the table below. No. of Coat of Plaster Situation Mix proportion by volume (Cement:Lime:Sand) Single coat plaster Both internal and external 1:0:3 1:0:4 1:0:6 1:1:6 1:2:9 Two coat plaster Both internal and … Read more