Cement plastering is commonly used as ideal coating for external and internal surface of wall. Cement plaster is usually applied in a single coat or double coat. Double coat plaster is applied where thickness of plaster is required to be more than 15 mm or when it is required to get a very fine finish. … Read more
There are many factors which influence the degree of compaction in the field. Some are compactor dependent and some depend on the soil being compacted. The factors which affect the degree of compaction are given below. 1. Type of soil Type of soil has a great influence on its compaction characteristics. Normally, heavy clays, clays … Read more
Objective For determination of specific gravity of soil solids by pycnometer method. Equipment & Apparatus Pycnometer Sieve(4.75 mm) Vacuum pump Oven Weighing balance Glass rod Preparation sample After receiving the soil sample it is dried in oven at a temperature of 105 to 1150C for a period of 16 to 24 hours. Procedure Dry the … Read more
While inspecting aggregate for quality control purpose, it is required to describe its physical properties, because physical properties of aggregate have an effect on the property of concrete. The physical properties of aggregate which should be described are given below. Name of parent rock & Group name Particle Shape Surface Texture Let us see how … Read more
Sometime it may happen that, the aggregate available at site is not conforming to the desired grading. In such case two or more aggregates from different sources may be combined to get the required grading. Fineness modulus value can be used as a technical way to blend coarse aggregate with fine aggregate to produce desired … Read more
Bricks are the building blocks of a building. If the quality of brick used in a structure is not good then it can lead to serious damages of building. Therefore it is necessary to check the quality of brick before using it in any construction activities. There are some field tests that we can conduct … Read more
It is necessary to check the quality of cement on site at the time of preliminary inspection. It is not possible to check all the engineering qualities of cement on site but there exist some field test which gives us a rough idea of quality of cement. While on site we can perform these field … Read more
Seasoning of Timber When a tree is newly felled, it contains about 50% or more of its own weight as water. This water is in the form of sap and moisture. The water is to be removed before the timber can be used for any engineering purpose. In other words, the timber is to be … Read more
Ribbed Tor Steel Bars This is a type of deformed high strength steel. These bars are manufactured by controlled cold twisting of hot rolled bars. These bars have ribs or projection on their surface. The ribbed tor steel bars are available in different sizes varying 6mm to 50 mm in diameter. These bars are commonly … Read more
Compaction should not be confused with consolidation. At the end of the consolidation and/or compaction process, a closer packing of soil grains results, which leads to increased shear strength and decreased compressibility and permeability. Difference Between Compaction and Consolidation Soil Compaction It is a dynamic process Compaction is almost instantaneous Densification is due to reduction … Read more