Suryakanta 
What is Presumptive Bearing Capacity? Building codes of various organizations in different countries gives the allowable bearing capacity that can be used for proportioning footing. These are called presumptive bearing capacity values. These values are based on experience with other structures already built. What are The Values of Presumptive Bearing Capacity? The table given below … Read more
What is Efflorescence on Plaster Surface? Efflorescence is one type of defect found on plaster surface. Efflorescence is the whitish crystalline substance which appears on the surface of walls due to presence of soluble salts, such as suphates of sodium, calcium and magnesium. Why Efflorescence Happens on Plaster Surface? Presence of salts in the lime, … Read more
He too serves a certain purpose who only stands and cheers. Henery Adams A shady business never yields a sunny life. B.C. Forbes The belly is the commanding part of the body. Homer One of the greatest pains to human nature is the pain of a new idea. Walter Bagehot Leave nothing for tomorrow which … Read more
Recommended Plaster Specifications A list of specifications for mixes suitable for various situations, which cover single-coat, two-coat and three-coat work is given in the table below. No. of Coat of Plaster Situation Mix proportion by volume (Cement:Lime:Sand) Single coat plaster Both internal and external 1:0:3 1:0:4 1:0:6 1:1:6 1:2:9 Two coat plaster Both internal and … Read more
Effect of Atmospheric Conditions on Plaster The prevailing weather at the time of plastering or during the setting, drying and hardening period may affect the finished work as follows: 1. Frost The destructive effect of frost on plaster work is significant. Unless special precautions are adopted, plastering work shall be suspended entirely during frosty weather. … Read more
Thickness of Plastering Finishing coats (and single-coat work, where employed) should be of such minimum thickness as just to provide a sufficient body of material to harden satisfactorily under the site conditions in any particular case. The total thickness of two-coat work exclusive of keys or dubbing out shall be generally about, but shall not … Read more
Number of Plaster Coats for Different Backgrounds The ideal number of coats, where practicable, is two, namely, the undercoat followed by a finishing coat. It is recognized, however, that much successful work has been carried out in the past with only a finishing coat plaster on reasonably plane backgrounds of brick, concrete and similar materials. … Read more
Importance or Objectives of Plastering Appearance To improve the appearance of the surface by providing an even, smooth, regular, clean and finished surface. Protection In case of external plastering, the objective is to preserve and protect the surface from atmospheric influences by acting as a protective coating. In case of internal plastering, the basic object … Read more
Blistering The development of one or more local swellings on the finished plaster surface. Cracking The development of one or more fissures not assignable to structural cause. Crazing The development of a series of hair cracks on the finished plaster surface. Known as ‘map crazing’, when it forms a haphazard pattern over the wall surface … Read more
Consistency of mortar is tested by using a standard cone apparatus. In this test a cone weighing 300 g is allowed to fall from a specified height to penetrate through the mortar. The depth of penetration of the cone is called its consistency value. It is expressed in mm. To read the test procedure click … Read more